This bench has been designed for conditioning our IDCA coolers in a temperature chamber and filling with high purity Helium

This process is carried out in two phases:

• An initial conditioning phase (typically at 50 °C), during which the cooler is connected to the vacuum pump.
• A Helium filling / vacuum pumping cycling phase at 20 °C

Design Features

• Adaptable to all our IDCA coolers
• Vacuum pump
• Control unit:
  • containing a multi-channel valve allowing to fix the Helium input pressure
  • allowing to check the vacuum level and the Helium pressure
• A temperature chamber equiped with filling interfaces (connected to the control unit)

Specifications

• Maximum Inlet pressure: 200 bar
• Maximum Outlet pressure: 50 bar
• Partial vacuum in cooler: < 50 mbar
• Supply voltage: 230 VAC / 50Hz
• Maximum power consumption: 2100 VA
• Ambient operating temperature: 15/35 °C
• Storage temperature: 10/40 °C
• Mass: < 250 kg
• Dimensions:
  • l: 2 m
  • w: 1 m
  • h: 2 m