Note: The UP 7098 cooler has a displacer designed to fit a standard SADA-size 1/2″ dewar bore.
- Integrated Dewar Cooler Assembly
- Baseline MTTF*: 30 000 hours
- Compressor dimensions: 55×122 mm
- Cold finger / approx. dewar bore: 1/2″
- Mass: 1.7 kg
- Cooling power @ 80K/23°C (Typical)*: 2000 mW
- Input power: < 50 W
- Operating temperature range: -52/71 °C
*: Please refer to Whitepaper QE01_Z84
**: Please refer to Whitepaper MTTF01_Z84
The UP7098 is the most powerfu; UP cooler currently available, with a 1/2″ displacer designed to fit into a SADA-compatible dewar.
The UP-LS series offers a comprehensive and versatile range of Linear Stirling coolers especially designed for cooling detectors in thermal imagers and IR sensors. Several of these cooler types are standard equipped with a patented thermal transfer block (Heatstop) in the cold finger, which reduces the required heatsink capacity at the warm end of the cold finger. The linear compressors can all be combined with several free displacer cold fingers.
The manufacturing of the clearance seal bearings of our split Stirling coolers is performed in-house with an accuracy of 1 µm or less over the full length of the bearing. This very accurate initial match between piston and liner adds significantly to the cooling efficiency, while improving the production reproducibility and cooler.